A double-layered, white polypropylene-filtered washable and reusable face mask that is cool, breathable and comfortable.
This item is not classified as either PPE or a medical device and is not tested against PPE standards.
2-Layered face mask
Polypropylene filter outer layer
Poly-cotton inner layer
Soft, non-abrasive elastic earloops
Washable & reusable (up to 50 washes)
Can be ironed on the inner layer on low heat
Very breathable, cool and comfortable
Made in Jamaica
Soak in a small container with warm soapy water (a dishwashing liquid of good quality is sufficient) for 5 to 10 minutes, then rinse thoroughly with cool, clean water to remove any fragrance or soap residue that could aggravate the sinuses. Squeeze out and let dry.
REPLACE THIS MASK IF THE OUTER FILTRATION MATERIAL BECOMES TORN OR DAMAGED.
The outside of this mask will become very dirty as it does its job. Remove the mask by hooking the earloops carefully with your finger and put it directly into your prepared container of washing solution. DO NOT MACHINE WASH. Wash your hands carefully and then wash your face.
B-BRAND A/MIST GOGGLES
Soft PVC frame.
Fits over most prescription glasses.
OPTICAL CLASS: 1
B T - (Medium impact energy at extreme temperatures)
2C-1.2 - UV Filter
FIELDS OF USE:
4 Large dust particles
9 Molten metal and hot solids
B-BRAND BB3000 ABEK1 Filter Replacement
Replacement ABEK1 filters (pair) for the BB3000 Halfmask Respirator.
For protection against:
Organic gases and vapours with a boiling point > 65° C
Inorganic gases and vapours
Sulphur dioxide and other acidic gases and vapours
ammonia and organic ammonia derivatives
B-BRAND BB3000 Twin Filter Halfmask Respirator
Face piece produced from soft non-allergic TPE material
Provides excellent fit to aid with protection
Low profile design offers improved field of vision
Soft adjustable strap ensures a perfect fit to wide range of contours
Can be fitted with A1, ABEK, and P3 filter cartridges
Gas filters can be fitted with replaceable pre-filters and retainer adapters
B-BRAND Corded Foam Earplugs
AVAILABLE COLOUR(S): Blue
Corded Foam Earplugs
Found to be in conformity with council directive 89/686/EEC relating to PPE.
Conforms to EN352-2:2002
SNR 34dB, H=33 M=31 L=28
B-BRAND EAR DEFENDER SNR 27
Premium foldable ear defender.
Extremely comfortable with extra-large foam pads.
Padded adjustable headband allows easy fitting.
Good attenuation performance.
Conforms to EN352-1:2002
SNR 33db, H=34, M=31, L=24
B-BRAND Flip Front Welding Goggles
AVAILABLE IN COLOURS: Green
Green soft PVC frame.
Green polycarbonate lens shade 5.
4 indirect vents.
Black ABS lens holder.
OPTICAL CLASS: 1
F - (Low impact energy)
5 - 3,1 - UV Filter
B-BRAND General Purpose Goggles
Polycarbonate lens with PVC frame.
OPTICAL CLASS: 1
B - (Medium impact energy)
2C-1.2 - UV Filter
FIELDS OF USE: 3 Liquids
High quality fingerless gloves for sport or gymnasium use.
PALM: Leather palm
BACK: Terry towel backing
ADDITIONAL FEATURES: Reflective piping and gel Inserts.
**Colours may appear different in person. Please contact Customer Service to request confirmation images.
WEIGHT: 290 g
HARNESS: 6-point plastic
SIZE ADJUSTMENT: Slip ratchet
SIZE: 55–62 cm
SERVICE LIFE: 5 years
TEMPERATURE: -20° C to +50° C
CERVA SIRET HV COAT
Waterproof And Windproof Extended Cut Raincoat With A Hood Integrated In The Collar
120cm In Length
Hood Girth Is Adjustable With Drawstring
Two Wide Front Pockets Covered With Plackets Against Water Penetration
Bottom Hem Of Sleeves Is Adjustable With Press Studs
SIZE RANGE: S - 3XL
MATERIAL: 100 % Polyurethane
EN 343: Protective clothing - Protection against rain
EN ISO 13688: Protective clothing. General requirements
EN ISO 20471: High visibility clothing - Test methods and requirements
STANDARDS: EN 420, EN 388 *, EN 374 *
CATEGORY: CAT. III
Excellent abrasion resistance: 30,000 cycles **
Excellent dexterity thanks to a finished coating
Excellent grip in both oily and damp environments
Triple nitrile coating that improves glove waterproofness
Ultra-light glove ensuring exceptional comfort and softness
Without latex proteins
PALM: NITRA-X nitrile
BACK: Smooth nitrile
CUFF: Pinked edge
LENGTH: 345 mm / 13.6''
THICKNESS: 1.25±0.03 mm (palm) / 0.75±0.03 mm (back)
PROTECTION: Chemical protection, mechanical protection - medium
GRIP/AREA OF USE: Oily surfaces
APPLICATION: Handling chemicals, handling oiled and/or lubricated objects and materials, handling paint, ink, colourings, glues and adhesives, oil and petrol refining, petrochemical industry.
* Following the new EU Regulation 2016/425 and the new standards on protective gloves EN 388:2016, EN ISO 374-1:2016, EN 374-2:2015 and EN 16523-1:2015, COFRA is re-certifying all its protective gloves. For this reason, it is possible that in our stock and on the market there are still gloves with the old standards EN 388:2003, EN 374-1:2003, EN 374-2:2003, EN 374-3:2003. COFRA guarantees that all the productions do not have technical and qualitative differences and are in compliance with the regulations in force.
** Test carried out in COFRA’s laboratories through the testing procedures indicated by EN 388 standard. The results show an abrasion resistance more than three times the highest level indicated by the standard, as proved by the chart here above.