WELDER BIS

STANDARD: EN ISO 20345:2011

GENDER: UNISEX

INJECTION MOLDED Construction:
In this method, the upper is placed in a footwear mould, in which the outer sole is attached to the upper by an injection of a molten polymer (such as PU) or rubber. This molten material bonds very strongly to the upper material as it cools.

WATER REPELLENT PRINTED LEATHER:
Leather is both protective and uniquely comfortable. Printed leather is often stamped with a design or texture to create a unique look. To be made water repellent, the leather is coated with a water repellent treatment. This provides a barrier against the absorption of water, but if the water sits on the surface, it will eventually seep through. The water repellent coating can be reapplied if necessary.

COMPOSITE TOE:
Rated ASTM F2413-18 I/75 C/75, these toe caps protect the feet from falling or rolling objects, and are made from a metal free, non-conductive, and lightweight polymer composite.

TEXELLE:
100% breathable polyamide fabric that is abrasion resistant and absorbs and releases moisture.

EVANIT:
EVANIT insoles are constructed from EVA (Ethylene-vinyl acetate) and a nitrile compound, and have a high bearing capacity and variable thicknesses (12mm, 8mm and 3.8mm). They are anatomically thermoformed (heated and formed in a mold), punched, covered in a highly breathable fabric, and antistatic.

ZERO PERFORATION APT:
The Zero Perforation APT (Anti-Perforation Textile) is a high-tensile fabric that is more flexible, has higher thermal insulation and is lighter than traditional steel midsoles/mid plates. APTs are antistatic, non-metallic, non-conductive, and protect 100% of the sole from puncture hazards.

HEAT RESISTANT NITRILE:
Polyurethane/Nitrile rubber resistant to up to +300°C (1 minute of contact).

WIDTH: 10 Mondopoint,11 Mondopoint

SIZES: 39-48 (EU), 6-13 (UK), 7-14 (US)