COFRA HULL BIS
- Free shipping in KGN Area
STANDARD: EN ISO 20345:2011
INJECTION MOLDED Construction
In this method, the upper is placed in a footwear mould, in which the outer sole is attached to the upper by an injection of a molten polymer (such as PU) or rubber. This molten material bonds very strongly to the upper material as it cools.
WATER REPELLENT LEATHER
Leather is both protective and uniquely comfortable. To be made water repellent, the leather is coated with a water repellent treatment. This provides a barrier against the absorption of water, but if the water sits on the surface, it will eventually seep through. The water repellent coating can be reapplied if necessary.
Rated ASTM F2413-11 I/75 C/75, EN ISO 20345:2011 or CAN CSA Z195-09, steel toe caps protect the feet from falling or rolling objects.
100% breathable polyamide fabric that is abrasion resistant and absorbs and releases moisture.
EVANIT insoles are constructed from EVA (Ethylene-vinyl acetate) and a nitrile compound, and have a high bearing capacity and variable thicknesses (12mm, 8mm and 3.8mm). They are anatomically thermoformed (heated and formed in a mold), punched, covered in a highly breathable fabric, and antistatic.
ZERO PERFORATION APT
The Zero Perforation APT (Anti-Perforation Textile) is a high-tensile fabric that is more flexible, has higher thermal insulation and is lighter than traditional steel midsoles/mid plates. APTs are antistatic, non-metallic, non-conductive, and protect 100% of the sole from puncture hazards.
Thermoplastic Polyurethane (TPU) is commonly referred to as the bridge between rubbers and plastics. Outsoles made from this material are extremely flexible, durable and smooth to the touch and lightweight.
WIDTH: 10 Mondopoint,11 Mondopoint
SIZES: 36-48 (EU), 3-13 (UK), 5-14 (US)