High quality fingerless gloves for sport or gymnasium use. 

PALM: Leather palm

BACK: Terry towel backing

ADDITIONAL FEATURES: Reflective piping and gel Inserts.

MATERIAL: Leather

STANDARDS: EN 420, EN 388 

CATEGORY: CAT. II

TECHNICAL FEATURES:

• Split leather cuffs provide greater resistance to wear and tear and better protection from oils
• The double-layer palm increases the mechanical resistance to abrasion

PALM: High-quality cow split leather - double-layer palm

BACK: High-quality cow split leather

CUFF: Cuffs made of split leather, length of cuffs 70 mm / 2,75’’

COLOUR: Grey

PROTECTION: Mechanical protection - heavy

GRIP/AREA OF USE: Oily surfaces, wet and dry grip

APPLICATION: Agriculture, construction, mechanical industry, soldering

PLUS: High-Quality Cow Split Leather

MATERIAL: Polyurethane 

STANDARDS:  EN 420, EN 388 *

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Cut resistant 
• Lightweight and Breathable,
• Lined without glass fibres 
• Excellent dexterity 
• Washable at 60 °C without altering the cut resistance and mechanical performances

COATING: Polyurethane

LINING: FIBERGUARD

COLOUR: Lime Green/Grey

PROTECTION: Protection against cutting - Level E (TDM Test)

GRIP/AREA OF USE: Dry grip

APPLICATION: Building and Construction, Glassworks, Handling of sharp tools, Mechanical industry, Metal sheets

SIZE: S - XXL

MATERIAL: Nitrile

STANDARDS:  EN 420, EN 388 *

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Fully coated
• Waterproof
• Quick-release system
• Reinforced safety cuffs
• Very sturdy and highly resistant to mechanical action

COATING: Nitrile 

LINING: 100% Jersey Cotton

CUFF: Reinforce Safety Cuffs 

COLOUR: White/Navy

PROTECTION: Mechanical Protection- Heavy

GRIP/AREA OF USE: Dry grip

APPLICATION: Building and Construction, Heavy industry, Shipping and Receiving

SIZE: L - XXL

• High-Quality Fingerless Gloves.
• Synthetic silicon-coated palm for extra grip.
• Gel Inserts.
• Comfort Fit.
• Reflective Piping.
• Ideal for use with power tools.
• Sport or gymnasium use.
• Minimal Risk

• Neoprene
• Extended length for added protection
• Tough exterior to protect against cuts and abrasions
• Comfortable cotton knit lining absorbs moisture

ADDITIONAL FEATURES: Resistant against oils, acids, caustics, alcohols and solvents

• Dielectric insulating gloves made of high-quality natural latex for protection against dangerous voltage. 

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Made of Aramid fibre 
• Cut-resistant lining reinforced with a steel mesh,
• Resistant to contact with sharp tools and/or oily surfaces

COATING: NITRA-X nitrile

LINING: DuPont™ Kevlar® aramid fibre, steel mesh, polyester

COLOUR: Green-yellow/Black

PROTECTION: Mechanical protection - heavy, protection against cutting - Level 5 (Coupe Test)

GRIP/AREA OF USE: Oily surfaces

APPLICATION: Building and construction, handling of oily metal sheets, mechanical industry, plastic industry, stamping

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388 *, EN 374 *

CATEGORY: CAT. III

TECHNICAL FEATURES: 

• Excellent abrasion resistance: 30,000 cycles **
• Excellent dexterity thanks to a finished coating
• Excellent grip in both oily and damp environments
• Triple nitrile coating that improves glove waterproofness
• Ultra-light glove ensuring exceptional comfort and softness
• Without latex proteins

PALM: NITRA-X nitrile

BACK: Smooth nitrile

LINING: Nylon

CUFF: Pinked edge

COLOUR: Green/Black

LENGTH: 345 mm / 13.6''

THICKNESS: 1.25±0.03 mm (palm) / 0.75±0.03 mm (back)

PROTECTION: Chemical protection, mechanical protection - medium

GRIP/AREA OF USE: Oily surfaces

APPLICATION: Handling chemicals, handling oiled and/or lubricated objects and materials, handling paint, ink, colourings, glues and adhesives, oil and petrol refining, petrochemical industry.

* Following the new EU Regulation 2016/425 and the new standards on protective gloves EN 388:2016, EN ISO 374-1:2016, EN 374-2:2015 and EN 16523-1:2015, COFRA is re-certifying all its protective gloves. For this reason, it is possible that in our stock and on the market there are still gloves with the old standards EN 388:2003, EN 374-1:2003, EN 374-2:2003, EN 374-3:2003. COFRA guarantees that all the productions do not have technical and qualitative differences and are in compliance with the regulations in force.

** Test carried out in COFRA’s laboratories through the testing procedures indicated by EN 388 standard. The results show an abrasion resistance more than three times the highest level indicated by the standard, as proved by the chart here above.

• 18" (46cm) overall length.
• Liquid proof.
• EN388: 2003
• Level 3 - Abrasion Resistance
• Level 1 - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture Resistance

• 14" (36cm) overall length
• Liquid proof
• EN388: 2016
• Level 3 - Abrasion Resistance
• Level X - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture Resistance
• Level A - ISO 13997 Cut Resistance

MATERIAL: Polyurethane

STANDARDS: EN 420, EN 388 *

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Made with the innovative NEXTOFIL yarn which gives maximum mechanical performance according to EN 388 standard
• High lightness and breathability
• Lining without glass fibres
• Maximum dexterity and cut resistance
• Washable at 40 °C without altering the cut-resistant and mechanical performances. Test carried out in COFRA’s laboratories **

COATING: Polyurethane

LINING: Braided threads of polyethylene HDPE, NEXTOFIL, polyester, nylon, elastane

COLOUR: Grey/grey

PROTECTION: Protection against cutting - Level D (TDM Test)

GRIP/AREA OF USE: Dry grip

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Fully coated 
• waterproof
• Knit-wrist
• Very sturdy and highly resistant to mechanical action

COATING: Nitrile

LINING: 100% Jersey cotton

CUFF: 100% Elastic cotton knit wrist

COLOUR: White/navy

PROTECTION: Heavy Mechanical Protection

GRIP/AREA OF USE: Dry grip

APPLICATION: Applications where a very robust glove is required, building and construction, heavy industry, shipping and receiving

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388 *

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Breathable back
• Knitted wrist,
• Very sturdy and highly resistant to mechanical action

COATING: Nitrile coating up to the knuckles

LINING: 100% Jersey cotton

CUFF: 100% Elastic cotton knit wrist

COLOUR: White/navy

PROTECTION: Heavy Mechanical Protection

GRIP/AREA OF USE: Dry grip

APPLICATION: Applications where a very robust glove is required, building and construction, heavy industry, shipping and receiving

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388 *

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Robust and water-resistant double-layered nitrile palm 
• Nitrile coating provides excellent protection against oils and grease
• Good cut resistance
• High abrasion resistance
• Oil Protection Technology - Double-layered coating resistant to oils and greases
• Special sand-finished nitrile coating provides superb grip on oily surfaces

COATING: Sand finished nitrile, double-layered, fully coated

LINING: UHMWPE polyethylene, polyester, elastane

COLOUR: White-black/black

PROTECTION: Mechanical protection - heavy, protection against cutting - Level B (TDM Test)

GRIP/AREA OF USE: Oily surfaces

APPLICATION: Building and construction, contact with oils and fats, handling of metal sheets and sharp metal components (even if oily or dirty), maintenance, mechanical and car industry

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388, EN 374, for food contact

CATEGORY: CAT. III

TECHNICAL FEATURES: 

• Extremely durable 
• Perfect fit, ensuring great comfort
• Internally chlorinated and flocked
• Recommended for work requiring excellent mechanical and chemical resistance
• Suitable for food contact
• Does not contain latex proteins
• “Diamond” slip-resistant finish

COATING: Nitrile

INTERNAL FINISH: Flocked

EXTERNAL FINISH: Lozenges (Diamond)

TREATMENT(S): Chlorinated

CUFF: Straight cuff

COLOUR: Green

LENGTH: 330 mm / 13''

THICKNESS: 0,45 mm (18 mil)

PROTECTION: Chemical protection, food, medium mechanical protection

GRIP/AREA OF USE: Humid surfaces

APPLICATION: Agriculture, automotive assembly and component production, automotive painting, chemical industry, cleaning, glue manufacturing, handling of pesticides, horticultural, laboratory, oil refinery, publishing industry, tanning, waste collection

• Rubber-dipped PVC chemical gloves
• 18" in length
• One-size
• Reusable, waterproof and durable.
• Protection against oils, grease, domestic use products, in cleaning and agricultural works. 
• Not for use when handling strong solvents or hydrocarbons.
• Anti-slip model with a rough finish for better grip.

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388 *

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Made with the innovative NEXTOFIL yarn which gives maximum mechanical performance according to EN 388 standard
• High lightness and breathability,
• Lining without glass fibres
• Maximum dexterity and cut resistance

COATING: Smooth nitrile

LINING: Braided threads of polyethylene HDPE, NEXTOFIL, polyester, nylon, and elastane

COLOUR: Grey/black

PROTECTION: Heavy Mechanical Protection, Cut-Resistant - Level D (TDM Test)

GRIP/AREA OF USE: Dry grip

APPLICATION: Handling of metal sheets and metal components, handling of sharp and blunt tools, mechanical industry, mechanical parts assembly, plastic industry

* Following the new EU Regulation 2016/425 and the new standards on protective gloves EN 388:2016, EN ISO 374-1:2016, EN 374-2:2015 and EN 16523-1:2015, COFRA is re-certifying all its protective gloves. For this reason, it is possible that in our stock and on the market there are still gloves with the old standards EN 388:2003, EN 374-1:2003, EN 374-2:2003, EN 374-3:2003. COFRA guarantees that all the productions do not have technical and qualitative differences and are in compliance with the regulations in force.

MATERIAL: PVC

STANDARDS: EN 420, EN 388, EN 511, Food contact

CATEGORY: CAT. II

TECHNICAL FEATURES:

• All components are in compliance with REACH regulations.
• Extra-long knit-wrist cuff prevents the entrance of cold air.
• EC Regulation no. 1935/2004 Compliant (“Materials and items intended to come into contact with food”) 
• EU Regulation no. 10/2011 Compliant (“Plastic materials and articles intended to come into contact with food”) 
• Materials safe for use and protected against the migration of substances on food.
• 3M™ THINSULATE™ Insulated Padding (Extra warmth, superior quality, 100 g/m²).
• Reduced thickness ensures the best thermal insulation as well as ease of movement.
• Perfect for outdoor environments and protects against cold as low as -30° C
• PVC palm with anti-slip finishing
• Suitable for dry and wet conditions
• Washable
• Water and wind-resistant fabric

PALM: PVC

BACK: Polyester fabric

LINING: Polyester

PADDING: 3M™ THINSULATE™ Insulation (100 g/m²)

CUFF: Polyester

COLOUR: Navy/black

PROTECTION: Food Safe, Cold Resistant

GRIP/AREA OF USE: Wet and dry grip

APPLICATION: Cold storage, handling of fish, fruit and vegetables, material handling in the warehouse, outdoor shipping and receiving in wintertime, outdoor works with snow and bad weather

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388*

CATEGORY: CAT. II

TECHNICAL FEATURES:

• Excellent abrasion resistance: 27.000 cycles **
• Excellent dexterity
• Excellent grip on dry surfaces
• Excellent oil resistance
• Special nitrile compound which guarantees further resistance with less thickness

COATING: GRANITICK Nitrile

LINING: High-Performing Polyester

COLOUR: Orange/Black

PROTECTION: Mechanical Protection - Medium

GRIP/AREA OF USE: Dry Grip

APPLICATION: Agriculture, building and construction, light industry, maintenance, mechanical industry

PLUS: Excellent Abrasion Resistance

* Following the new EU Regulation 2016/425 and the new standards on protective gloves EN 388:2016, EN ISO 374-1:2016, EN 374-2:2015 and EN 16523-1:2015, COFRA is re-certifying all its protective gloves. For this reason, it is possible that COFRA gloves on the market will still adhere to the old standards EN 388:2003, EN 374-1:2003, EN 374-2:2003, EN 374-3:2003. COFRA guarantees that all the productions do not have technical and qualitative differences and are in compliance with the regulations in force.

**Test carried out in COFRA’s laboratories through the testing procedures indicated by EN 388 standard. The results show an abrasion resistance more than three times the highest level indicated by the standard.

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388 , EN 511

CATEGORY: CAT. II

TECHNICAL FEATURES:
COFRA-TEX membrane maintains internal microclimate in wind-chill and humidity. Excellent for work environments with temperatures as low as -30 °C. Fabric made with 3 layers that ensure elasticity, water repellency and heat protection.

• Flexible softshell fabric
• Water repellent, windproof and breathable inner membrane with COFRA-TEX technology
• Long neoprene cuff with velcro closure covering the entire sleeve to avoid the entrance of cold air and water
• Membrane certified values, palm breathability: 3.0 mg/cm²h
• Nitrile foam coating provides a breathable and flexible oil protection coating

COATING: Nitrile foam

FABRIC: Softshell with COFRA-TEX membrane

CUFF: Neoprene

COLOUR: Turquoise/black

PROTECTION: Cold Resistance

GRIP/AREA OF USE: Wet and dry grip

APPLICATION: Airport workers, construction, naval workers, freezer room stock handling