Replacement ABEK1 filters (pair) for the BB3000 Halfmask Respirator.

For protection against: 

• Organic gases and vapours with a boiling point > 65° C
• Inorganic gases and vapours 
• Sulphur dioxide and other acidic gases and vapours
• ammonia and organic ammonia derivatives

Pairs with OZON S600 POLYGARD HALF-MASK RESPIRATOR. 

FEATURES:

• Design that allows equal distribution of the airflow through activated carbon, extending its useful life.
• Offset construction for better weight distribution, increasing comfort and visibility.
• SOLD IN PAIRS

Suitable for protection against:

• Organic Vapours
• Chlorine (Cl2)
• Hydrogen Sulfide (H2S)
• Hydrogen cyanide (NH3)
• Methylamine (CH3 NH2)

PRODUCT DESCRIPTION

Polygard S600 Series Half Facepiece Respirator, with high softness, lightweight TPR facepiece with adjustable headgear and sliding fit system. Available in 2 sizes: Medium S602M (M) and Large S603L (L).

PRODUCT CERTIFICATION

Certification: EN140: 1998, in accordance with the provisions of Regulation (EU) 2016/425 relating to personal protective equipment.

PRODUCT MATERIALS

• Facepiece: TPR
• High resistance polyethylene bands
• Colour: Gray

APPLICATION

Protection of the respiratory tract against the inhalation of solid particles, liquid particles, gases and vapours when used with suitable mechanical, electrostatic chemical or mixed filters.

CHARACTERISTICS

• TPR face seal with high softness
• Up and down sliding adjustment system 
• Greater seal line and with variation in thickness

USAGE RESTRICTIONS

• This respirator does not supply oxygen. Use in adequately ventilated areas without oxygen deficiency and that do not contain explosive atmospheres.
• Do not use in environments where the concentration level of the contaminant is Immediately Dangerous to Life or Health (IDLH).

DESCRIPTION: 

Filtering mask that helps to limit the spread of aerosols that could be vehicles of viruses and bacteria. WASHABLE & REUSABLE.

EXTERNAL LAYER: 

• 100% water repellent recycled polyester (110 g/m² ± 10%). OEKO-TEX
• Protects the end-user from the saliva droplets expelled during expiratory activities or present in the air 

INTERNAL LAYER:

• 100% cotton (190 g/m² ± 10%) that provides pleasant comfort when in contact with the face

ELASTICS: 

• Spandex and nylon
• Span around the head, providing good adherence to the face 

BREATHABILITY WITH WATER VAPOR: 16.3 mg/cm²*h

WATERPROOFNESS (OUTER LAYER): 0 mm water dragging

SIZES: One size

WASHING/CARE GUIDE:

• Maximum temperature: 60 °C (Five washing cycles are guaranteed). 
• To extend the life of the product, gently hand wash at 35-40 °C. 
• DO NOT IRON.

USAGE GUIDE:

1. Wash hands and face with soap before and after using the mask and before touching it. 
2. Wash mask before use and before wearing it. 
3. Take the mask from the external part, put the mask on your face, covering your nose, mouth and chin.
4. Be sure the elastics are well placed behind your head. 
5. After putting the mask on properly, do not touch the mask with your hands.

IMPORTANT:

• Not classified as PPE, nor a medical device. 
• Intended for people that have to respect all instructions regarding social distancing and all necessary precautionary rules imposed by COVID-19 emergency. 

DESCRIPTION: Class 1 gas filter

LEVEL OF PROTECTION: K1

PROTECTION AGAINST: Ammonia and its organic derivatives

TYPE OF CONNECTOR: Thread connector

STANDARD: EN 14387:2004+A1:2008

WEIGHT OF PAIR: 214 g

DESCRIPTION: Class 1 multiple gas filter, combined with a P3 dust filter reusable and not decomposable.

LEVEL OF PROTECTION: ABEK1 P3 R

PROTECTION AGAINST: 

• Specific gases and organic vapours with boiling point > 65°C
• Specific gases and inorganic vapours
• Sulphur dioxide and other gases and acid vapours
• Ammonia and its organic derivatives
• Solid and liquid toxic aerosol

TYPE OF CONNECTOR: Thread connector

STANDARD: EN 14387:2004+A1:2008

DESCRIPTION

•  Face piece produced from soft non-allergic TPE material
•  Provides excellent fit to aid with protection
•  Low profile design offers improved field of vision
•  Soft adjustable strap ensures a perfect fit to wide range of contours
•  Can be fitted with A1, ABEK, and P3 filter cartridges
•  Gas filters can be fitted with replaceable pre-filters and retainer adapters

DESCRIPTION: 

Filtering dual-filter gas half mask. The hypoallergenic TPE half-mask ensures suitable softness in the nasal area and appropriate comfort. The shape fits comfortably to any facial structure and has excellent adherence. The half mask is equipped with a central exhalation valve which dissipates heat and moisture easily by increasing comfort during use. The harness has a flexible headband connected to adjustable elastics and an attachment clip that is easy to use. It is possible to disassemble the mask fully and to wash its components if necessary.

MATERIAL: Thermoplastic elastomer (TPE)

TYPE OF CONNECTOR: Thread connector

STANDARD: EN 140:1998

A double-layered, white, OEKO-TEX approved, 100% water repellent, washable and reusable polypropylene half-mask. 

Pursuant to articles 102-113 of the “Consumer Code” legislative decree 6 September 2005, N. 206 declares that this item is neither a PPE or a Medical Device, and does not harm the health of the wearer.

TECHNICAL FEATURES

• Double-layered face mask
• 100% water-repellent polypropylene
• Spandex/nylon elastic earloops
• Washable & reusable 
• White
• One size
• Individually packaged
• Made in Italy

WASHING INSTRUCTIONS

Gently hand-wash at ideally 35-40°C (maximum temperature 60° C). Hang to dry. DO NOT IRON. DO NOT MACHINE WASH. 

A double-layered, white polypropylene-filtered washable and reusable face mask that is cool, breathable and comfortable. 

This item is not classified as either PPE or a medical device and is not tested against PPE standards.

TECHNICAL FEATURES

• 2-Layered face mask
• Polypropylene filter outer layer
• Poly-cotton inner layer
• Hypoallergenic materials
• Soft, non-abrasive elastic earloops
• Washable & reusable (up to 50 washes)
• Can be ironed on the inner layer on low heat
• Very breathable, cool and comfortable
• White
• Made in Jamaica

WASHING INSTRUCTIONS

Soak in a small container with warm soapy water (a dishwashing liquid of good quality is sufficient) for 5 to 10 minutes, then rinse thoroughly with cool, clean water to remove any fragrance or soap residue that could aggravate the sinuses. Squeeze out and let dry. 

REPLACE THIS MASK IF THE OUTER FILTRATION MATERIAL BECOMES TORN OR DAMAGED.

IMPORTANT:

The outside of this mask will become very dirty as it does its job. Remove the mask by hooking the earloops carefully with your finger and put it directly into your prepared container of washing solution. DO NOT MACHINE WASH. Wash your hands carefully and then wash your face.

The RP1000 Disposable Comfort Mask provides relief from nuisance levels of non-toxic dust.

It is not for use where concentrations are at or above the Permissible Exposure Limit (PEL). Not NIOSH approved, or suitable for use against toxic or hazardous air contaminants, e.g. paint spray mists, fumes, gases and vapours.

• Extremely lightweight
• Metal nose clip to fit individual facial contours
• Does not impair breathing, voice and vision
• One size
• Packaging: 1 pc

The RP1000 Disposable Comfort Mask provides relief from nuisance levels of non-toxic dust.

It is not for use where concentrations are at or above the Permissible Exposure Limit (PEL). Not NIOSH approved, or suitable for use against toxic or hazardous air contaminants, e.g. paint spray mists, fumes, gases and vapours.

• Extremely lightweight
• Metal nose clip to fit individual facial contours
• Does not impair breathing, voice and vision
• One size
• Packaging: 50/box