MATERIAL: Polyurethane

STANDARDS: EN 420, EN 388 *

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Made with the innovative NEXTOFIL yarn which gives maximum mechanical performance according to EN 388 standard
• High lightness and breathability
• Lining without glass fibres
• Maximum dexterity and cut resistance
• Washable at 40 °C without altering the cut-resistant and mechanical performances. Test carried out in COFRA’s laboratories **

COATING: Polyurethane

LINING: Braided threads of polyethylene HDPE, NEXTOFIL, polyester, nylon, elastane

COLOUR: Grey/grey

PROTECTION: Protection against cutting - Level D (TDM Test)

GRIP/AREA OF USE: Dry grip

MATERIAL: Nitrile

STANDARDS:  EN 420, EN 388 *

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Fully coated
• Waterproof
• Quick-release system
• Reinforced safety cuffs
• Very sturdy and highly resistant to mechanical action

COATING: Nitrile 

LINING: 100% Jersey Cotton

CUFF: Reinforce Safety Cuffs 

COLOUR: White/Navy

PROTECTION: Mechanical Protection- Heavy

GRIP/AREA OF USE: Dry grip

APPLICATION: Building and Construction, Heavy industry, Shipping and Receiving

SIZE: L - XXL

• Rubber-dipped PVC chemical gloves
• 18" in length
• One-size
• Reusable, waterproof and durable.
• Protection against oils, grease, domestic use products, in cleaning and agricultural works. 
• Not for use when handling strong solvents or hydrocarbons.
• Anti-slip model with a rough finish for better grip.

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388 *

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Made with the innovative NEXTOFIL yarn which gives maximum mechanical performance according to EN 388 standard
• High lightness and breathability,
• Lining without glass fibres
• Maximum dexterity and cut resistance

COATING: Smooth nitrile

LINING: Braided threads of polyethylene HDPE, NEXTOFIL, polyester, nylon, and elastane

COLOUR: Grey/black

PROTECTION: Heavy Mechanical Protection, Cut-Resistant - Level D (TDM Test)

GRIP/AREA OF USE: Dry grip

APPLICATION: Handling of metal sheets and metal components, handling of sharp and blunt tools, mechanical industry, mechanical parts assembly, plastic industry

* Following the new EU Regulation 2016/425 and the new standards on protective gloves EN 388:2016, EN ISO 374-1:2016, EN 374-2:2015 and EN 16523-1:2015, COFRA is re-certifying all its protective gloves. For this reason, it is possible that in our stock and on the market there are still gloves with the old standards EN 388:2003, EN 374-1:2003, EN 374-2:2003, EN 374-3:2003. COFRA guarantees that all the productions do not have technical and qualitative differences and are in compliance with the regulations in force.

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388*

CATEGORY: CAT. II

TECHNICAL FEATURES:

• Excellent abrasion resistance: 27.000 cycles **
• Excellent dexterity
• Excellent grip on dry surfaces
• Excellent oil resistance
• Special nitrile compound which guarantees further resistance with less thickness

COATING: GRANITICK Nitrile

LINING: High-Performing Polyester

COLOUR: Orange/Black

PROTECTION: Mechanical Protection - Medium

GRIP/AREA OF USE: Dry Grip

APPLICATION: Agriculture, building and construction, light industry, maintenance, mechanical industry

PLUS: Excellent Abrasion Resistance

* Following the new EU Regulation 2016/425 and the new standards on protective gloves EN 388:2016, EN ISO 374-1:2016, EN 374-2:2015 and EN 16523-1:2015, COFRA is re-certifying all its protective gloves. For this reason, it is possible that COFRA gloves on the market will still adhere to the old standards EN 388:2003, EN 374-1:2003, EN 374-2:2003, EN 374-3:2003. COFRA guarantees that all the productions do not have technical and qualitative differences and are in compliance with the regulations in force.

**Test carried out in COFRA’s laboratories through the testing procedures indicated by EN 388 standard. The results show an abrasion resistance more than three times the highest level indicated by the standard.

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388, EN 374, for food contact

CATEGORY: CAT. III

TECHNICAL FEATURES: 

• Extremely durable 
• Perfect fit, ensuring great comfort
• Internally chlorinated and flocked
• Recommended for work requiring excellent mechanical and chemical resistance
• Suitable for food contact
• Does not contain latex proteins
• “Diamond” slip-resistant finish

COATING: Nitrile

INTERNAL FINISH: Flocked

EXTERNAL FINISH: Lozenges (Diamond)

TREATMENT(S): Chlorinated

CUFF: Straight cuff

COLOUR: Green

LENGTH: 330 mm / 13''

THICKNESS: 0,45 mm (18 mil)

PROTECTION: Chemical protection, food, medium mechanical protection

GRIP/AREA OF USE: Humid surfaces

APPLICATION: Agriculture, automotive assembly and component production, automotive painting, chemical industry, cleaning, glue manufacturing, handling of pesticides, horticultural, laboratory, oil refinery, publishing industry, tanning, waste collection

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Made of Aramid fibre 
• Cut-resistant lining reinforced with a steel mesh,
• Resistant to contact with sharp tools and/or oily surfaces

COATING: NITRA-X nitrile

LINING: DuPont™ Kevlar® aramid fibre, steel mesh, polyester

COLOUR: Green-yellow/Black

PROTECTION: Mechanical protection - heavy, protection against cutting - Level 5 (Coupe Test)

GRIP/AREA OF USE: Oily surfaces

APPLICATION: Building and construction, handling of oily metal sheets, mechanical industry, plastic industry, stamping

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Fully coated 
• waterproof
• Knit-wrist
• Very sturdy and highly resistant to mechanical action

COATING: Nitrile

LINING: 100% Jersey cotton

CUFF: 100% Elastic cotton knit wrist

COLOUR: White/navy

PROTECTION: Heavy Mechanical Protection

GRIP/AREA OF USE: Dry grip

APPLICATION: Applications where a very robust glove is required, building and construction, heavy industry, shipping and receiving

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388 *

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Breathable back
• Knitted wrist,
• Very sturdy and highly resistant to mechanical action

COATING: Nitrile coating up to the knuckles

LINING: 100% Jersey cotton

CUFF: 100% Elastic cotton knit wrist

COLOUR: White/navy

PROTECTION: Heavy Mechanical Protection

GRIP/AREA OF USE: Dry grip

APPLICATION: Applications where a very robust glove is required, building and construction, heavy industry, shipping and receiving

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388 *

CATEGORY: CAT. II

TECHNICAL FEATURES: 

• Robust and water-resistant double-layered nitrile palm 
• Nitrile coating provides excellent protection against oils and grease
• Good cut resistance
• High abrasion resistance
• Oil Protection Technology - Double-layered coating resistant to oils and greases
• Special sand-finished nitrile coating provides superb grip on oily surfaces

COATING: Sand finished nitrile, double-layered, fully coated

LINING: UHMWPE polyethylene, polyester, elastane

COLOUR: White-black/black

PROTECTION: Mechanical protection - heavy, protection against cutting - Level B (TDM Test)

GRIP/AREA OF USE: Oily surfaces

APPLICATION: Building and construction, contact with oils and fats, handling of metal sheets and sharp metal components (even if oily or dirty), maintenance, mechanical and car industry

MATERIAL: Nitrile

STANDARDS: EN 420, EN 388 *, EN 374 *

CATEGORY: CAT. III

TECHNICAL FEATURES: 

• Excellent abrasion resistance: 30,000 cycles **
• Excellent dexterity thanks to a finished coating
• Excellent grip in both oily and damp environments
• Triple nitrile coating that improves glove waterproofness
• Ultra-light glove ensuring exceptional comfort and softness
• Without latex proteins

PALM: NITRA-X nitrile

BACK: Smooth nitrile

LINING: Nylon

CUFF: Pinked edge

COLOUR: Green/Black

LENGTH: 345 mm / 13.6''

THICKNESS: 1.25±0.03 mm (palm) / 0.75±0.03 mm (back)

PROTECTION: Chemical protection, mechanical protection - medium

GRIP/AREA OF USE: Oily surfaces

APPLICATION: Handling chemicals, handling oiled and/or lubricated objects and materials, handling paint, ink, colourings, glues and adhesives, oil and petrol refining, petrochemical industry.

* Following the new EU Regulation 2016/425 and the new standards on protective gloves EN 388:2016, EN ISO 374-1:2016, EN 374-2:2015 and EN 16523-1:2015, COFRA is re-certifying all its protective gloves. For this reason, it is possible that in our stock and on the market there are still gloves with the old standards EN 388:2003, EN 374-1:2003, EN 374-2:2003, EN 374-3:2003. COFRA guarantees that all the productions do not have technical and qualitative differences and are in compliance with the regulations in force.

** Test carried out in COFRA’s laboratories through the testing procedures indicated by EN 388 standard. The results show an abrasion resistance more than three times the highest level indicated by the standard, as proved by the chart here above.

• 18" (46cm) overall length.
• Liquid proof.
• EN388: 2003
• Level 3 - Abrasion Resistance
• Level 1 - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture Resistance

• 14" (36cm) overall length
• Liquid proof
• EN388: 2016
• Level 3 - Abrasion Resistance
• Level X - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture Resistance
• Level A - ISO 13997 Cut Resistance