Replacement ABEK1 filters (pair) for the BB3000 Halfmask Respirator.

For protection against: 

• Organic gases and vapours with a boiling point > 65° C
• Inorganic gases and vapours 
• Sulphur dioxide and other acidic gases and vapours
• ammonia and organic ammonia derivatives

MATERIAL: Polycarbonate

COLOUR: Clear

STANDARDS: 

• EN 166 - General standard
• EN 170 - Ultraviolet filters

FRONT MATERIAL: PVC

FRAME FEATURES: 

• AIR VENTILATION SYSTEM
• A system that minimizes fogging by allowing air to flow.

WEIGHT: 79 g

AREA OF USE: Mechanical indoor work with good visibility conditions.

PLUS: COMPATIBLE WITH THE USE OF CORRECTIVE GLASSES AND DUST MASKS, VENTILATION SYSTEM

The RP1000 Disposable Comfort Mask provides relief from nuisance levels of non-toxic dust.

It is not for use where concentrations are at or above the Permissible Exposure Limit (PEL). Not NIOSH approved, or suitable for use against toxic or hazardous air contaminants, e.g. paint spray mists, fumes, gases and vapours.

• Extremely lightweight
• Metal nose clip to fit individual facial contours
• Does not impair breathing, voice and vision
• One size
• Packaging: 1 pc

The RP1000 Disposable Comfort Mask provides relief from nuisance levels of non-toxic dust.

It is not for use where concentrations are at or above the Permissible Exposure Limit (PEL). Not NIOSH approved, or suitable for use against toxic or hazardous air contaminants, e.g. paint spray mists, fumes, gases and vapours.

• Extremely lightweight
• Metal nose clip to fit individual facial contours
• Does not impair breathing, voice and vision
• One size
• Packaging: 50/box

A double-layered, white, OEKO-TEX approved, 100% water repellent, washable and reusable polypropylene half-mask. 

Pursuant to articles 102-113 of the “Consumer Code” legislative decree 6 September 2005, N. 206 declares that this item is neither a PPE or a Medical Device, and does not harm the health of the wearer.

TECHNICAL FEATURES

• Double-layered face mask
• 100% water-repellent polypropylene
• Spandex/nylon elastic earloops
• Washable & reusable 
• White
• One size
• Individually packaged
• Made in Italy

WASHING INSTRUCTIONS

Gently hand-wash at ideally 35-40°C (maximum temperature 60° C). Hang to dry. DO NOT IRON. DO NOT MACHINE WASH. 

A double-layered, white polypropylene-filtered washable and reusable face mask that is cool, breathable and comfortable. 

This item is not classified as either PPE or a medical device and is not tested against PPE standards.

TECHNICAL FEATURES

• 2-Layered face mask
• Polypropylene filter outer layer
• Poly-cotton inner layer
• Hypoallergenic materials
• Soft, non-abrasive elastic earloops
• Washable & reusable (up to 50 washes)
• Can be ironed on the inner layer on low heat
• Very breathable, cool and comfortable
• White
• Made in Jamaica

WASHING INSTRUCTIONS

Soak in a small container with warm soapy water (a dishwashing liquid of good quality is sufficient) for 5 to 10 minutes, then rinse thoroughly with cool, clean water to remove any fragrance or soap residue that could aggravate the sinuses. Squeeze out and let dry. 

REPLACE THIS MASK IF THE OUTER FILTRATION MATERIAL BECOMES TORN OR DAMAGED.

IMPORTANT:

The outside of this mask will become very dirty as it does its job. Remove the mask by hooking the earloops carefully with your finger and put it directly into your prepared container of washing solution. DO NOT MACHINE WASH. Wash your hands carefully and then wash your face.

• Hard hat with rain trough
• HDPE shell 
• 4-Point plastic suspension
• Ratchet adjustment 
• 4 Anchor points for chin strap 
• ANSI Type I Class E

**Colours may appear different in person. Please contact Customer Service to request confirmation images. 

MATERIAL: HDPE

WEIGHT: 290 g

VENTILATION: YES

HARNESS: 6-point plastic

SIZE ADJUSTMENT: Pin-lock

SIZE: 55–62 cm

SERVICE LIFE: 5 years

TEMPERATURE: -20° C to +50° C

DESCRIPTION: 

Filtering mask that helps to limit the spread of aerosols that could be vehicles of viruses and bacteria. WASHABLE & REUSABLE.

EXTERNAL LAYER: 

• 100% water repellent recycled polyester (110 g/m² ± 10%). OEKO-TEX
• Protects the end-user from the saliva droplets expelled during expiratory activities or present in the air 

INTERNAL LAYER:

• 100% cotton (190 g/m² ± 10%) that provides pleasant comfort when in contact with the face

ELASTICS: 

• Spandex and nylon
• Span around the head, providing good adherence to the face 

BREATHABILITY WITH WATER VAPOR: 16.3 mg/cm²*h

WATERPROOFNESS (OUTER LAYER): 0 mm water dragging

SIZES: One size

WASHING/CARE GUIDE:

• Maximum temperature: 60 °C (Five washing cycles are guaranteed). 
• To extend the life of the product, gently hand wash at 35-40 °C. 
• DO NOT IRON.

USAGE GUIDE:

1. Wash hands and face with soap before and after using the mask and before touching it. 
2. Wash mask before use and before wearing it. 
3. Take the mask from the external part, put the mask on your face, covering your nose, mouth and chin.
4. Be sure the elastics are well placed behind your head. 
5. After putting the mask on properly, do not touch the mask with your hands.

IMPORTANT:

• Not classified as PPE, nor a medical device. 
• Intended for people that have to respect all instructions regarding social distancing and all necessary precautionary rules imposed by COVID-19 emergency. 

DESCRIPTION: Class 1 gas filter

LEVEL OF PROTECTION: K1

PROTECTION AGAINST: Ammonia and its organic derivatives

TYPE OF CONNECTOR: Thread connector

STANDARD: EN 14387:2004+A1:2008

WEIGHT OF PAIR: 214 g

DESCRIPTION: Class 1 multiple gas filter, combined with a P3 dust filter reusable and not decomposable.

LEVEL OF PROTECTION: ABEK1 P3 R

PROTECTION AGAINST: 

• Specific gases and organic vapours with boiling point > 65°C
• Specific gases and inorganic vapours
• Sulphur dioxide and other gases and acid vapours
• Ammonia and its organic derivatives
• Solid and liquid toxic aerosol

TYPE OF CONNECTOR: Thread connector

STANDARD: EN 14387:2004+A1:2008

DESCRIPTION

•  Face piece produced from soft non-allergic TPE material
•  Provides excellent fit to aid with protection
•  Low profile design offers improved field of vision
•  Soft adjustable strap ensures a perfect fit to wide range of contours
•  Can be fitted with A1, ABEK, and P3 filter cartridges
•  Gas filters can be fitted with replaceable pre-filters and retainer adapters

DESCRIPTION: 

Filtering dual-filter gas half mask. The hypoallergenic TPE half-mask ensures suitable softness in the nasal area and appropriate comfort. The shape fits comfortably to any facial structure and has excellent adherence. The half mask is equipped with a central exhalation valve which dissipates heat and moisture easily by increasing comfort during use. The harness has a flexible headband connected to adjustable elastics and an attachment clip that is easy to use. It is possible to disassemble the mask fully and to wash its components if necessary.

MATERIAL: Thermoplastic elastomer (TPE)

TYPE OF CONNECTOR: Thread connector

STANDARD: EN 140:1998

MATERIAL: Polycarbonate

COLOUR: Clear

STANDARDS: 

• EN 166 - General standard
• EN 170 - Ultraviolet filters

LENSES TREATMENTS: 

• ANTI-SCRATCH TREATMENT
• A hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear.
• ANTI-FOG TREATMENT
• The anti-fog treatment prevents fogging of the lenses. It also disperses condensation that forms on the lenses due to movement from cold to hot environments, improving visibility in critical conditions.

FRONT MATERIAL: Polypropylene + TPR

FRAME FEATURES: 

• AIR VENTILATION SYSTEM
• A system that minimizes fogging by allowing air to flow.

WEIGHT: 75 g

AREA OF USE: Mechanical indoor work with good visibility conditions.

PLUS: COMPATIBLE WITH THE USE OF CORRECTIVE GLASSES AND DUST MASKS, VENTILATION SYSTEM, WRAP-AROUND DESIGN

• Impact-resistant polycarbonate lens
• 99.9% UV protection
• Anti-fog coating on lens
• Anti-splash: special vents prevent liquid from getting into eyes
• Flexible PVC construction
• Part number: 5109
• Meets ANSI Z87.1+

• Impact-resistant polycarbonate lens
• 99.9% UV protection
• Scratch-resistant coating
• Flexible PVC construction
• Economical eye protection
• Part number: 5101
• Meets ANSI Z87.1+

AVAILABLE IN COLOURS: Green

DESCRIPTION:

• Green soft PVC frame.
• Green polycarbonate lens shade 5.
• 4 indirect vents.
• Black ABS lens holder.

OPTICAL CLASS: 1

STANDARDS:

• EN 175:1997
• EN 166

ADDITIONAL FEATURES:  

• F - (Low impact energy) 
• 5 - 3,1 - UV Filter

DESCRIPTION:

• Polycarbonate lens with PVC frame.
• Comfortable.
• Light weight.
• Direct vent.

 OPTICAL CLASS: 1

STANDARD: EN166

ADDITIONAL FEATURES:  

• B - (Medium impact energy)
• 2C-1.2 - UV Filter

FIELDS OF USE: 3 Liquids

DESCRIPTION:

• Polycarbonate lens.
• Direct vent.
• Soft PVC frame.
• Fits over most prescription glasses.
• Adjustable strap.

OPTICAL CLASS: 1

STANDARD:  EN166

ADDITIONAL FEATURES:  

• B T - (Medium impact energy at extreme temperatures)
• 2C-1.2 - UV Filter

FIELDS OF USE: 

• 4 Large dust particles 
• 9 Molten metal and hot solids

• Ultra-bright built-in LED lights
• High-impact resistant polycarbonate lens
• 99.9% UV protection
• Anti-fog and scratch resistant coating on lens
• Lights can be independently turned on or off
• Batteries included
• Part number: 5420
• Meets ANSI Z87.1+

• High-impact polycarbonate lens
• 99.9% UV Protection
• Anti-fog and scratch-resistant coating on lens
• Wrap-around design hugs the face
• Non-slip rubber nose piece and temples
• Meets ANSI Z87.1+

• High-impact resistant polycarbonate lens
• 99.9% UV Protection
• Anti-fog and scratch resistant coating on lens
• Non-slip nose piece and temples
• Foam brow guard
• More colours available. Please contact Customer Service.
• Meets ANSI Z87.1+

• Impact-resistant polycarbonate lens
• 99.9% UV protection
• Anti-fog and anti-scratch resistant coating on lens
• Molded-in sideshields
• Adjustable temples for excellent fit
• Meets ANSI Z87.1+

MATERIAL: Polycarbonate

COLOUR: Grey

STANDARDS: 

• EN 166 - General standard
• EN 172 - Solar protection filters for industrial use
• STANAG 4296 - Eye Protection For The Individual Soldier/Ballistic Protection (V50 - 263 m/s (946.8 km/h))

LENSES TREATMENTS:

• ANTI-SCRATCH TREATMENT
• A hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear.
• ANTI-FOG TREATMENT
• The anti-fog treatment prevents fogging of the lenses. It also disperses condensation that forms on the lenses due to movement from cold to hot environments, improving visibility in critical conditions.   
• UV 400 PROTECTION
• UV 400 protection extends the protection range beyond the conventional 380nm. It also filters UV radiation beyond this wavelength, blocking the transmittance of the light spectrum up to 400nm and protecting the eyes from a wider range of harmful light rays.

FRONT MATERIAL: Polycarbonate

MATERIAL OF TEMPLES: Polycarbonate

FRAME FEATURES:

• EYEBROW PROTECTION
• A soft, protective measure that makes glasses more comfortable and provides excellent impact resistance against high-speed particles and accidental/frontal impact to the operator.
• SOFT NOSE PAD
• The soft rubber used for the nose pad improves the comfort of the eyewear, allowing prolonged use.

WEIGHT: 33 g

MATERIAL: Polycarbonate

COLOUR: Clear

STANDARDS: 

• EN 166 - General standard,
• EN 170 - Ultraviolet filters,
• STANAG 4296 - Eye Protection For The Individual Soldier/Ballistic Protection (V50 - 249 m/s (896.4 km/h))

LENSES TREATMENTS:

• ANTI-SCRATCH TREATMENT
• A hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear.
• ANTI-FOG TREATMENT
• The anti-fog treatment prevents fogging of the lenses. It also disperses condensation that forms on the lenses due to movement from cold to hot environments, improving visibility in critical conditions.   
• UV 400 PROTECTION
• UV 400 protection extends the protection range beyond the conventional 380nm. It also filters UV radiation beyond this wavelength, blocking the transmittance of the light spectrum up to 400nm and protecting the eyes from a wider range of harmful light rays.

FRONT MATERIAL: Polycarbonate

MATERIAL OF TEMPLES: Polycarbonate

FRAME FEATURES:

• EYEBROW PROTECTION
• A soft, protective measure that makes glasses more comfortable and provides excellent impact resistance against high-speed particles and accidental/frontal impact to the operator.
• SOFT NOSE PAD
• The soft rubber used for the nose pad improves the comfort of the eyewear, allowing prolonged use.

WEIGHT: 33 g

AREA OF USE: Mechanical indoor work with good visibility conditions.

MATERIAL: Polycarbonate

COLOUR: Grey

STANDARDS: 

• EN 166 - General standard
• EN 172 - Solar protection filters for industrial use
• STANAG 4296 - Eye Protection For The Individual Soldier/Ballistic Protection (V50 - 263 m/s (946.8 km/h))

LENSES TREATMENTS:

• ANTI-SCRATCH TREATMENT
• A hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear.
• ANTI-FOG TREATMENT
• The anti-fog treatment prevents fogging of the lenses. It also disperses condensation that forms on the lenses due to movement from cold to hot environments, improving visibility in critical conditions.   
• UV 400 PROTECTION
• UV 400 protection extends the protection range beyond the conventional 380nm. It also filters UV radiation beyond this wavelength, blocking the transmittance of the light spectrum up to 400nm and protecting the eyes from a wider range of harmful light rays.

FRONT MATERIAL: Polycarbonate

MATERIAL OF TEMPLES: Polycarbonate

FRAME FEATURES:

• EYEBROW PROTECTION
• A soft, protective measure that makes glasses more comfortable and provides excellent impact resistance against high-speed particles and accidental/frontal impact to the operator.
• SOFT NOSE PAD
• The soft rubber used for the nose pad improves the comfort of the eyewear, allowing prolonged use.

WEIGHT: 33 g

AREA OF USE: Outdoor work, mechanical work with risk of glare, agriculture, building, refineries, ballistics.

MATERIAL: Polycarbonate

COLOUR: Clear

STANDARDS: 

• EN 166 - General standard
• EN 170 - Ultraviolet filters

LENSES TREATMENTS:

• ANTI-SCRATCH TREATMENT
• A hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear.
• ANTI-FOG TREATMENT
• The anti-fog treatment prevents fogging of the lenses. It also disperses condensation that forms on the lenses due to movement from cold to hot environments, improving visibility in critical conditions.

FRONT MATERIAL: Nylon

MATERIAL OF TEMPLES: Nylon

FRAME FEATURES: 

• SOFT NOSE PAD
• The soft rubber used for the nose pad improves the comfort of the eyewear, allowing prolonged use.
• EXTENDIBLE TEMPLES
• Temples extend lengthwise for optimal adaptation to the face of the wearer, ensuring comfort.

WEIGHT: 28 g

MATERIAL: Polycarbonate

COLOUR: Grey

STANDARDS: 

• EN 166 - General standard
• EN 172 - Solar protection filters for industrial use

LENSES TREATMENTS:

• ANTI-SCRATCH TREATMENT
• A hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear.
• ANTI-FOG TREATMENT
• The anti-fog treatment prevents fogging of the lenses. It also disperses condensation that forms on the lenses due to movement from cold to hot environments, improving visibility in critical conditions.

FRONT MATERIAL: Nylon

MATERIAL OF TEMPLES: Nylon

FRAME FEATURES: 

• SOFT NOSE PAD
• The soft rubber used for the nose pad improves the comfort of the eyewear, allowing prolonged use.
• EXTENDIBLE TEMPLES
• Temples extend lengthwise for optimal adaptation to the face of the wearer, ensuring comfort.

WEIGHT: 28 g

MATERIAL: Polycarbonate

COLOUR:  I/O (Indoor/Outdoor)

STANDARDS: 

• EN 166 - General standard
• EN 170 - Ultraviolet filters

LENSES TREATMENTS:

• ANTI-SCRATCH TREATMENT
• A hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear.
• UV 400 PROTECTION
• UV 400 protection extends the protection range beyond the conventional 380nm. It also filters UV radiation beyond this wavelength, blocking the transmittance of the light spectrum up to 400nm and protecting the eyes from a wider range of harmful light rays.
• MIRRORED TREATMENT
• This treatment is applied to the lenses of the eyewear, which are covered with a thin, partially reflective layer that allows greater reflection of incident light on the lens itself. This reduces most of the light that reaches the eyes, making the eyewear suitable and recommended for use in conditions where extremely strong light is present and where it is necessary to be protected against glare (snow and ice).

FRONT MATERIAL: Nylon

MATERIAL OF TEMPLES: Nylon + TPR

FRAME FEATURES:

• ADJUSTABLE NOSE PAD
• This soft nose pad is equipped with a metal core that allows the eyewear to be adjusted and adapted to any facial structure. This results in a comfortable fit for a wide range of nose bridges, which eliminates eye strain.
• EXTENDIBLE TEMPLES
• Temples extend lengthwise for optimal adaptation to the face of the wearer, ensuring comfort. 
• ADJUSTABLE TEMPLES
• The grade of the temples can be adjusted vertically for optimal adaptation to the face of the wearer, ensuring comfort.
• SOFT NOSE PAD
• The soft rubber used for the nose pad improves the comfort of the eyewear, allowing prolonged use.
• SOFT EAR PIECES
• These soft rubber pieces are situated at the end of the temples and are made of soft rubber that reduces the pressure on the wearer’s temples, ensuring better adherence and greater comfort during prolonged use.

WEIGHT: 29 g

AREA OF USE: Work with forklift trucks, mechanical work, work involving the passage between dark and bright environments.

MATERIAL: Polycarbonate

COLOUR: Grey

STANDARDS: 

• EN 166 - General standard
• EN 172 - Solar protection filters for industrial use

LENSES TREATMENTS:

• ANTI-SCRATCH TREATMENT PLUS (4.29 cd/(m2-lx)
• This hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear. In conformity with EN 166 requirements, eyewear with Anti-Scratch Treatment Plus satisfy the resistance parameters for the protection against damage to the surface of the lens caused by thin particles (the minimum provided requirement being a luminance factor lower than 5 cd/(m2-lx)). This surpasses the standard anti-scratch treatments on the marketplace. These eyewear can be marked with the letter ‘K’.
• ANTI-FOG TREATMENT PLUS (14 s)
• The anti-fog treatment prevents fogging of the lenses. It also disperses condensation that forms on the lenses due to movement from cold to hot environments, improving visibility in critical conditions. In conformity with EN 166 requirements, eyewear with Anti-Fog Treatment Plus satisfy the resistance parameters for the protection against fogging (the minimum provided requirement being a resistance of at least 8s). These eyewear can be marked with the letter ‘N’.
• UV 400 PROTECTION
• UV 400 protection extends the protection range beyond the conventional 380nm. It also filters UV radiation beyond this wavelength, blocking the transmittance of the light spectrum up to 400nm and protecting the eyes from a wider range of harmful light rays. 

FRONT MATERIAL: Nylon

MATERIAL OF TEMPLES: Nylon + TPR

FRAME FEATURES: 

• ADJUSTABLE NOSE PAD
• This soft nose pad is equipped with a metal core that allows the eyewear to be adjusted and adapted to any facial structure. This results in a comfortable fit for a wide range of nose bridges, which eliminates eye strain.
• EXTENDIBLE TEMPLES
• Temples extend lengthwise for optimal adaptation to the face of the wearer, ensuring comfort. 
• ADJUSTABLE TEMPLES
• The grade of the temples can be adjusted vertically for optimal adaptation to the face of the wearer, ensuring comfort.
• SOFT NOSE PAD
• The soft rubber used for the nose pad improves the comfort of the eyewear, allowing prolonged use.
• SOFT EAR PIECES
• These soft rubber pieces are situated at the end of the temples and are made of soft rubber that reduce the pressure on the wearer’s temples, ensuring better adherence and greater comfort during prolonged use.

WEIGHT: 29 g

AREA OF USE: Outdoor work, mechanical work with risk of glare, agriculture, building, refineries.

MATERIAL: Polycarbonate

COLOUR: Clear

STANDARDS: 

• EN 166 - General standard
• EN 170 - Ultraviolet filters

LENSES TREATMENTS:

• ANTI-SCRATCH TREATMENT PLUS (4.45 cd/(m2-lx)
• This hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear. In conformity with EN 166 requirements, eyewear with Anti-Scratch Treatment Plus satisfy the resistance parameters for the protection against damage to the surface of the lens caused by thin particles (the minimum provided requirement being a luminance factor lower than 5 cd/(m2-lx)). This surpasses the standard anti-scratch treatments on the marketplace. These eyewear can be marked with the letter ‘K’.
• ANTI-FOG TREATMENT PLUS (18 s)
• The anti-fog treatment prevents fogging of the lenses. It also disperses condensation that forms on the lenses due to movement from cold to hot environments, improving visibility in critical conditions. In conformity with EN 166 requirements, eyewear with Anti-Fog Treatment Plus satisfy the resistance parameters for the protection against fogging (the minimum provided requirement being a resistance of at least 8s). These eyewear can be marked with the letter ‘N’.
• UV 400 PROTECTION
• UV 400 protection extends the protection range beyond the conventional 380nm. It also filters UV radiation beyond this wavelength, blocking the transmittance of the light spectrum up to 400nm and protecting the eyes from a wider range of harmful light rays.

FRONT MATERIAL: Nylon

MATERIAL OF TEMPLES: Nylon + TPR

FRAME FEATURES:

• ADJUSTABLE NOSE PAD
• This soft nose pad is equipped with a metal core that allows the eyewear to be adjusted and adapted to any facial structure. This results in a comfortable fit for a wide range of nose bridges, which eliminates eye strain.
• EXTENDIBLE TEMPLES
• Temples extend lengthwise for optimal adaptation to the face of the wearer, ensuring comfort. 
• ADJUSTABLE TEMPLES
• The grade of the temples can be adjusted vertically for optimal adaptation to the face of the wearer, ensuring comfort.
• SOFT NOSE PAD
• The soft rubber used for the nose pad improves the comfort of the eyewear, allowing prolonged use.
• SOFT EAR PIECES
• These soft rubber pieces are situated at the end of the temples and are made of soft rubber that reduces the pressure on the wearer’s temples, ensuring better adherence and greater comfort during prolonged use.

WEIGHT: 29 g

AREA OF USE: Mechanical indoor work with good visibility conditions.

MATERIAL: Polycarbonate

COLOUR: Red Mirrored

STANDARDS: 

• EN 166 - General standard
• EN 172 - Solar protection filters for industrial use

LENSES TREATMENTS:

• ANTI-SCRATCH TREATMENT
• A hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear.
• UV 400 PROTECTION
• UV 400 protection extends the protection range beyond the conventional 380nm. It also filters UV radiation beyond this wavelength, blocking the transmittance of the light spectrum up to 400nm and protecting the eyes from a wider range of harmful light rays.
• MIRRORED TREATMENT
• This treatment is applied to the lenses of the eyewear, which are covered with a thin, partially reflective layer that allows greater reflection of incident light on the lens itself. This reduces most of the light that reaches the eyes, making the eyewear suitable and recommended for use in conditions where extremely strong light is present and where it is necessary to be protected against glare (snow and ice).

FRONT MATERIAL: Polycarbonate

MATERIAL OF TEMPLES: Polycarbonate + TPR

FRAME FEATURES: 

• ADJUSTABLE NOSE PAD
• This soft nose pad is equipped with a metal core that allows the eyewear to be adjusted and adapted to any facial structure. This results in a comfortable fit for a wide range of nose bridges, which eliminates eye strain.
• SOFT NOSE PAD
• The soft rubber used for the nose pad improves the comfort of the eyewear, allowing prolonged use.
• SOFT EAR PIECES
• These soft rubber pieces are situated at the end of the temples and are made of soft rubber that reduces the pressure on the wearer’s temples, ensuring better adherence and greater comfort during prolonged use.

WEIGHT: 30 g

AREA OF USE: Outdoor work with intense sunlight and with the risk of glare, agriculture, building, refineries.

MATERIAL: Polycarbonate

COLOUR: Grey

STANDARDS: 

• EN 166 - General standard
• EN 172 - Solar protection filters for industrial use

LENSES TREATMENTS:

• ANTI-SCRATCH TREATMENT 
• A hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear.
• ANTI-FOG TREATMENT
• The anti-fog treatment prevents fogging of the lenses. It also disperses condensation that forms on the lenses due to movement from cold to hot environments, improving visibility in critical conditions. 
• UV 400 
• UV 400 protection extends the protection range beyond the conventional 380nm. It also filters UV radiation beyond this wavelength, blocking the transmittance of the light spectrum up to 400nm and protecting the eyes from a wider range of harmful light rays.

FRONT MATERIAL: Polycarbonate

MATERIAL OF TEMPLES: Polycarbonate + TPR

FRAME FEATURES: 

• ADJUSTABLE NOSE PAD
• This soft nose pad is equipped with a metal core that allows the eyewear to be adjusted and adapted to any facial structure. This results in a comfortable fit for a wide range of nose bridges, which eliminates eye strain.
• SOFT NOSE PAD
• The soft rubber used for the nose pad improves the comfort of the eyewear, allowing prolonged use.
• SOFT EAR PIECES
• These soft rubber pieces are situated at the end of the temples and are made of soft rubber that reduces the pressure on the wearer’s temples, ensuring better adherence and greater comfort during prolonged use.

WEIGHT: 30 g

MATERIAL: Polycarbonate

COLOUR: Clear

STANDARDS: 

• EN 166 - General standard
• EN 170 - Ultraviolet filters

LENSES TREATMENTS: 

• ANTI-SCRATCH TREATMENT
• A hardening treatment is applied to the surfaces of the lenses, which improves abrasion resistance and increases the life of the eyewear.
• ANTI-FOG TREATMENT
• The anti-fog treatment prevents fogging of the lenses. It also disperses condensation that forms on the lenses due to movement from cold to hot environments, improving visibility in critical conditions. 
• UV 400 
• UV 400 protection extends the protection range beyond the conventional 380nm. It also filters UV radiation beyond this wavelength, blocking the transmittance of the light spectrum up to 400nm and protecting the eyes from a wider range of harmful light rays.

FRONT MATERIAL: Polycarbonate

MATERIAL OF TEMPLES: Polycarbonate + TPR

FRAME FEATURES: 

• ADJUSTABLE NOSE PAD
• This soft nose pad is equipped with a metal core that allows the eyewear to be adjusted and adapted to any facial structure. This results in a comfortable fit for a wide range of nose bridges, which eliminates eye strain.
• SOFT NOSE PAD
• The soft rubber used for the nose pad improves the comfort of the eyewear, allowing prolonged use.
• SOFT EAR PIECES
• These soft rubber pieces are situated at the end of the temples and are made of soft rubber that reduce the pressure on the wearer’s temples, ensuring better adherence and greater comfort during prolonged use.

WEIGHT: 30 g

AREA OF USE: Mechanical indoor work with good visibility conditions.